SAS-SuperISO100/180Microbiological Air Sampler

Microbiological Air Sampler

• YOUR PARTNER IN ENVIRONMENTAL MICROBIOLOGY
  The very familiar yellow SAS (Surface Air System)” is considered the international standard for portable air microbiological samplers. Over 25 years experience has been gained in five continents helping microbiologists in the pharmaceutical and food industry, hospital sector and indoor air quality fields. Experience has also been gained from space exploration as the SAS (Surface Air System) was used on board the International Space station. This knowledge has resulted in the development of the new SAS-ISO 100” and SAS-ISO 180”.
  THE BASIC IDEA
  To use a simple plate for air and surface sampling
  To have the additional flexibility of choice, either Contact plates or Petri dishes
  To apply cGLP and cGMP to air sampling operations
  To establish data on the microbial level in selected environments
  To organise sequential sampling to obtain a more representative air sample under actual operating conditions
  The SAS ISO” has the following new features:
  Performance in compliance with ISO 14698-1
  Large LCD with illuminated touch panel
  All operator commands via touch keypad for easier cleaning
  Over 70.000 litres of air / 8 hours autonomy
  Infrared transfer of sampling data to PC or printer
  Up to 300 sampling cycles memorised
  USP chapter < 1116 > and 21-CFR 11 Compliance
  Sampling rate accurately maintained by speed sensor-incorrect aspiration aborts cycle
  Design avoids turbulence in unidirectional air flow and re-aspiration of tested air in accordance with ISO specifications
  Total traceability
  Bi-directional port to input and output data to a central unit from 1 to 24 samplers
  Calibration system by finger-tip control without opening the instrument
  Automatic calibration reminder
  Easy calibration monitoring with additional anemometer system
  Sampler can be operated whilst attached to mains
  Established yellow SAS (Surface Air System) features and performances are maintained:
  Possibility to use 55 mm or 84 mm Contact plates (RODAC) and standard disposable 90 mm Pri dishes
  Interval sampling with fully programmable parameters for in operation” monitoring
  Delay Start of up to 60 minutes
  Infrared remote control (optional extra)
  Certified aspirating head in aluminium or stainless steel
  Multiple language choice
  Reduced sampling time (six or ten minutes for 1000 litres of air)
  Suitability in isolator
  Plus a worldwide service and support network which includes:
  International PBI is the only company with its own microbiological wind tunnel to test the air samplers from a microbial point of view
  Complete validation documentation available to help the local validation process
  Product specialists provide on-site training and certification of personnel for the proper usage of the air samplers
  Official factory calibration in Milan performed in 48 hours
  Over 100 Application Notes
  Standard Operating Procedures (SOP)
  I.Q., O.Q., P. Q. documentation or on-site activation